Laser cutting cost calculator
Enter the part’s cut length, pierce count and area to see material, machine time, unit cost and the quote total straight away. The formula is open; change the figures to match your own shop.
- Free
- No sign-up
- Runs in your browser
Which formula does the calculator use?
The classic cost formula fabrication shops use for quoting. Seeing each line on its own also makes it easier to explain a price to your customer.
Unit cost = Material + (Cutting time + Piercing time) × Rate per minute + Finishing
Quote price = Unit cost × (1 + margin) × Quantity + Fixed per-job charges
- Material = Net area × thickness × density × price per kg × (1 + scrap)
- Cutting time = Total cut length ÷ cutting speed
- Rate per minute = Machine hourly rate ÷ 60
Frequently asked questions
How is a laser cutting price calculated?
The unit cost is the material cost, plus cutting and piercing time multiplied by the machine’s rate per minute, plus any finishing. The quote is that unit cost with your margin, multiplied by the quantity, plus fixed per-job charges. The calculator uses this formula and shows every step under “How was this calculated?”.
Where do I find the cutting speed?
Your own machine’s cutting table is the most accurate source. Speed depends on the material, thickness, laser power, assist gas and the edge quality you need. The manufacturer’s parameter table is a good start; measure a few real jobs and update your table.
How much scrap allowance should I use?
It depends on how well parts nest on the sheet. The worked example uses 20%; regular parts that nest tightly need less, large or irregular parts more.
What does the machine hourly rate cover?
Depreciation, power and gas, maintenance, consumables and the operator. That is why every shop’s rate is different, and why the figure in the calculator is only an example.
Can I use it for waterjet or plasma?
Yes. The formula is the same; enter your own waterjet or plasma cutting speed, pierce time and hourly rate. For waterjet, include abrasive cost in the hourly rate.
Are the figures I enter stored anywhere?
No. The calculation runs entirely in your browser; nothing is sent to our server or saved.
Let’s quote straight from the drawing.
Cut length, pierces and part area can be measured from a DXF file and priced with your own hourly rate and cutting speeds, with your approval before anything reaches the customer.
